
FISCHER 547027 - Solar system for flat roofs with 15° inclination and Sud panel orientation SW-II-S BE 15°
Réf. 547027
Prix disponible sur devis
Contactez-nous pour obtenir le meilleur tarif
Description
System Solar-Wind South II Flat roof system with tilt 10 ° -15 ° and oriented panels in the South Benefits: * No hole in the roof: the Solar-Wind South II system is locked with small modular ballast concrete. * Fast: the installation time for the Solar-Wind South II system is 30 minutes per kWp per pair of operators. * Lightweight: the reduced inclination of the panels (10 ° and 15 °) and the presence of the crankcase reduce the effect of the action of the wind on the system, and then the number of weights in coverage. * Complete: The system is suitable for a wide range of panels (width 950 ÷ 1050 mm x height 1559 ÷ 1690 mm). * Versatile: the system is modular, allowing an extremely flexible panels layout. * Electrically Safe: special center and end terminals allow the grounding of the system. * Tested: tested in the wind tunnel up to 240 km / h. Versions: * Aluminum brackets AW 6060 T66 / T5 according to EN 755-2: 2013 * A2-70 stainless steel bolts to EN ISO 3506-1 / 2: 2009 Suitable for: * Flat roof without drilling Possible configurations: * Single module horizontally Function: * Define the installation layout taking into account the distances to cover edges and obstacles. * Define the number of weights (to be purchased separately) to use for each individual element (brackets or port ballast) as a function of the snow and wind loads of the installation area of the plant, according to the national regulations. * Place the front brackets SW-II BF and the brackets SW-II S-B (intermediate and final) on the cover, according to the project. * Place the solar panels on the brackets and secure them using the terminals SW and SW-MC-II-II-MF. * Fix the crankcase SW-II S CARTER on intermediate brackets SW-II BM-S and SW-II-S BE end to reduce the effect of the action of the wind. * Place the ballast as designed. * Protecting cover interposing the protective bearings SW-II PAD under the ballast. Adapté à : Solar-Wind II Sud 15° Épaisseur [mm] : 6 Filetage : M 8 Poids [g] : 1160




