FISCHER 551534 - Epoxy resin FIS EB

Description

Epoxy resin FIS EB The epoxy resin anchors and connections of rebars in C1 and C2 seismic zone. Certificate for berths in: * Concrete C20 / 25 to C50 / 60, cracked and uncracked and seismic loads (seismic performance category C1 and C2) Certificate for bar connections of post-installed reinforcement: * Concrete from C20 / 25 to C50 / 60, cracked and non-cracked Also suitable for: * Natural stone with compact * Solid wood * Laminated timber Advantages: * The epoxy resin is EB FIS certified in cracked concrete, both in the use with threaded rods (up to M30) both with improved adherence bars (up to ø40). * FIS EB can be applied up to temperatures of 40 ° C support, with the processing times that are ideal for the execution of hardware of large threaded bars or deep grouting with an improved grip bars. * EB FIS has been certified in a seismic zone, with seismic performance of C1 and C2. * FIS EB can also be applied in holes made with a drill. * FIS EB is also certified with the use of drill bits aspiring internally Fischer FHD quarries. * More safety and speed in the pipeline: the maximum loads are guaranteed thanks to a lower number of operations (it is no longer necessary to brush and blow holes with steel brushes and compressed air) and less dust in the air environment work. * With FIS EB certified applications are also possible in submerged holes and in wet concrete. * Suitable for connections and reinforcements of the timber elements. Injection Chemical anchor for use with: * Threaded rod FIS A galvanized steel (class 5 and 8 or stainless steel (A4-70) * reinforcing bar To: * Civil Construction: construction joints in the connection of new columns and beams, slabs and even existing concrete stairs. * Works of recovery and restructuring: Expansion and plinths, beams and foundation slabs. * Irrigidemento and reinforcement of floors and ceilings, upgrading and expansion of beams and columns. * Metal carpentry: anchoring of steel plate floor and fee for connecting steel beams and columns. * Construction of attics collaborating in wood / concrete. * Timber construction: connection of the wooden load-bearing structures (a frame or wall type "X-Lam") to the foundations in CA by means of hold-down plates. Function: * EB FIS is a chemical anchor for two-component epoxy injection. * Resin and hardener are in two separate containers and are not mixed or activated until the extrusion is carried out through the FIS MR Plus mixer. * Before installing perform the cleaning of the hole according to the instructions. * Extrude regularly bonded anchor from the bottom of the hole without creating air pockets. * Manually install the threaded rods FIS A or the reinforcing bars by turning slightly until you reach the base of the hole. * In the case of pass-through installation space between the anchor and the object to be fixed must be filled with FIS EB. * For applications in seismic performance category C2 fill the annular space between the stem of the bar and the hole of the object to be fixed with resin FIS EB. * For an optimal filling use the appropriate filling disk FFD (optional). Certification ETA : pertinent Charges : lourds/structurels Contenu : 390 Mélangeurs : 2 Rapport d'essai au feu : pertinent Stockage : 36