FISCHER 571219 - Pre-assembled final clamp for photovoltaic modules with aluminum frame PM F

Description

Terminal preassembled PM Terminal end preassembled photovoltaic modules with aluminum frame Advantages: * Full range: PM pre-assembled clamps can fix all PV modules framed with thickness from 26 mm to 50 mm. * Rapid: thanks to the hammer head nut FCN AL the preassembled PM terminals can be plugged in and locked quickly at any point of the support profile. * Comfortable: the preassembled PM terminals and thanks to the spring remain raised during the tightening phases and through the element plastic remain in position not flowing into the profile. * Complete: pre-assembled PM terminals do not require additional elements (screws, washers, bolts). Versions: * PM terminals C and F PM aluminum alloy AW 6060 T66 according to EN 755-2: 2013 * Screw with cylindrical head with hexagon socket head insert encased in stainless steel A2-70 according to EN ISO 3506-1 / 2: 2009 * FCN AL hammer head nut in aluminum alloy AW 6060 T66 according to EN 755-2: 2013, and gray nylon PA6. Suitable for: * Coverage System pitched with hooks * Flat roof system with triangles * Corrugated sheet metal covering system * Coverage System in corrugated sheets * Special structures System Where: * Solar-fish * Solar-mid * Solar-flat * Solar 40/30 Function: * Insert the lower part of the preassembled PM terminals in the upper slot of the profile. * Rotate the preassembled PM terminals clockwise by 90 degrees.Lock the photovoltaic module by applying a tightening torque to the screw with a cylindrical head with recessed hexagonal socket head cap of approximately 10 Nm. * (Optional) To protect the installation insert the anti break-in collection DAE hexagonal sphere. Clé de serrage [mm] : 6 Couple de serrage [Nm] : 10 Encombrement étau à main : 36 Filetage : M 8 Poids : 0,075